Carbon dioxide sequestration using NaHSO4 and NaOH: A dissolution and carbonation optimisation study

The use of NaHSO4 to leach out Mg fromlizardite-rich serpentinite (in form of MgSO4) and the carbonation of CO2 (captured in form of Na2CO3 using NaOH) to form MgCO3 and Na2SO4 was investigated. Unlike ammonium sulphate, sodium sulphate can be separated via precipitation during the recycling step avoiding energy intensive evaporation process required in NH4-based processes. To determine the effectiveness of the NaHSO4/NaOH process when applied to lizardite, the optimisation of the dissolution and carbonation steps were performed using a UK lizardite-rich serpentine. Temperature, solid/liquid ratio, particle size, concentration and molar ratio were evaluated. An optimal dissolution efficiency of 69.6% was achieved over 3 h at 100 °C using 1.4 M sodium bisulphate and 50 g/l serpentine with particle size 75-150 μm. An optimal carbonation efficiency of 95.4% was achieved over 30 min at 90 °C and 1:1 magnesium:sodium carbonate molar ratio using non-synthesised solution. The CO2 sequestration capacity was 223.6 g carbon dioxide/kg serpentine (66.4% in terms of Mg bonded to hydromagnesite), which is comparable with those obtained using ammonium based processes. Therefore, lizardite-rich serpentinites represent a valuable resource for the NaHSO4/NaOH based pH swing mineralisation process.