کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5206291 1502957 2014 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
High rate fracture toughness testing of thermoplastics
ترجمه فارسی عنوان
تست سختی شکست سنگین ترموپلاستی
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه شیمی شیمی آلی
چکیده انگلیسی
To support the selection of polymers for applications subject to impact, industry needs an international standard method for evaluating high-rate fracture resistance. As another step towards establishing one, three generic thermoplastics were tested by five laboratories in a round-robin programme. Strain-gauged single edge-notched bend specimens of high density polyethylene, poly(vinyl chloride) and poly(methyl methacrylate) were subjected to impact at speeds from 0.2 to 27 m/s, and the crack tip loading time to fracture initiation, ts, was measured. All three polymers indicated an inverse 4/3-power dependence of ts on impact velocity, as predicted for an adiabatic decohesion mechanism - which is able to account for ts in terms of bulk properties. Fracture toughness was calculated from failure time using a velocity dependent 'key curve' correction, assuming a constant elastic modulus. The scatter in toughness was significant, particularly for the more brittle materials, and appeared to be independent of test speed. The findings justify an emphasis on fracture initiation time as the primary measured parameter, and guide our proposals for further refining the method.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Polymer Testing - Volume 33, February 2014, Pages 79-87
نویسندگان
, , , , , , ,