Influence of maleic anhydride grafted ethylene propylene diene monomer (MAH-g-EPDM) on the properties of EPDM nanocomposites reinforced by halloysite nanotubes

Ethylene propylene diene monomer grafted with maleic ahydride (MAH-g-EPDM) was prepared by peroxide-initiated melt grafting of MAH onto EPDM using a HAAKE internal mixer at 180 °C and 60 rpm for 5 min. The effect of MAH-g-EPDM compatibilizer on the interactions, and tensile and morphological properties of halloysite nanotubes (HNTs) filled EPDM nanocomposites was investigated. The tensile properties of the nanocomposites were influenced by two major factors. The hydrogen bonding between MAH-g-EPDM and HNTs, which was confirmed by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), as well as the formation of EPDM-rich and HNT-rich areas, are the dominant effects on the tensile strength of the nanocomposites at low and high HNT loading, respectively. It was found that the cure time (t90), maximum torque (MH) and minimum torque (ML) of the compatibilized nanocomposites were increased after adding MAH-g-EPDM. The reinforcement mechanism of the compatibilized and un-compatibilized EPDM/HNT nanocomposites was also investigated based on morphological observations of the nanocomposites.