Understanding the acceleration in the ring-opening of lactones delivered by microwave heating

This paper reports the first detailed study focussed upon identifying the influence that microwave heating (MWH) has upon the mechanic steps involved in the tin catalysed ring-opening of lactones such as ɛ-caprolactone (CL). Direct comparison of conventional (CH) and microwave (MWH) heated kinetic studies showed that a key factor in the reduction of the polymerisation cycle time with MWH was the elimination of the induction period associated with in situ catalyst manufacture and initiation. NMR studies demonstrated that the most significant mechanistic change contributing to the observed induction time reduction/elimination was faster initiation (i.e., reaction of the initiatior/catalyst complex with the first monomer unit). Consequently, analysis of the dielectric properties of the reaction components predicted that this MWH induced change was related to the selective volumetric heating of both the catalyst and the monomer. Furthermore, this indication of the greater significance of the initiation step in defining the length of the induction period suggests that this is the rate determining step of the process, whether conducted by CH or MWH. Increasing the catalyst concentration was demonstrated to produce significant reductions in reaction heat-up time and to induce a significant (up to 30 °C) overshoot in reaction mixture bulk temperature in with MWH only. Thus supporting the conclusion that selective heating of the organometallic species in the system contributes directly to differences in the reaction conditions and which need to be taken into account when drawing comparisons with CH systems. Consequently, both effects were concluded to be thermally generated from selective volumetric heating.