Shrinkage behaviors of dental composite restorations-The experimental-numerical hybrid analysis

ObjectivesTo investigate the effects of light curing protocols on the shrinkage behaviors, contraction stress, and microleakage in composite restorations by an experimental-numerical hybrid analysis.MethodsThree groups of human molars were collected to receive different light-curing protocols: vertical or oblique curing at regular intensity, and vertical curing at reduced intensity. For each tooth, the composite fillings were consecutively placed under unbonded and bonded states, and their shrinkage behaviors were examined with a digital image correlation (DIC) technique. The strains of the unbonded restorations were input into two finite element analysis (FEA) models with settings of the composite as either homogeneous or hardened along polymerization gradients. The preliminary solutions were verified by their individual deformations in the bonded restorations. The interfacial microleakage of restorations was also determined by micro-CT scanning and compared with the FEA results.ResultsThe bonded restorations showed centripetal shrinkage patterns with greater downward displacements than their unbonded restorations. Vertical curing at regular intensity caused the greatest shrinkage strain, contraction stress, and microleakage among the three protocols. Low-intensity curing reduced overall shrinkage strain and displacements at cervical margin, but did not prevent the formation of microleakage. Oblique curing caused asymmetric shrinkage with the tooth-shielded side revealing less deformation. Setting the polymerization-dependent elastic moduli of the composite enhanced the reliability of FEA.SignificanceThis hybrid analysis comprehensively examined the polymerization shrinkage behaviors. Both the light intensity and direction affect the shrinkages and contraction stress. Oblique curing decreases shrinkage due to the attenuated irradiation by tooth-shielding rather than modulations of shrinkage direction.