کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
5433162 1398055 2017 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Chairside CAD/CAM materials. Part 2: Flexural strength testing
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد بیومتریال
پیش نمایش صفحه اول مقاله
Chairside CAD/CAM materials. Part 2: Flexural strength testing
چکیده انگلیسی

ObjectiveStrength is one of the preferred parameters used in dentistry for determining clinical indication of dental restoratives. However, small dimensions of CAD/CAM blocks limit reliable measurements with standardized uniaxial bending tests. The objective of this study was to introduce the ball-on-three-ball (B3B) biaxial strength test for dental for small CAD/CAM block in the context of the size effect on strength predicted by the Weibull theory.MethodsEight representative chairside CAD/CAM materials ranging from polycrystalline zirconia (e.max ZirCAD, Ivoclar-Vivadent), reinforced glasses (Vitablocs Mark II, VITA; Empress CAD, Ivoclar-Vivadent) and glass-ceramics (e.max CAD, Ivoclar-Vivadent; Suprinity, VITA; Celtra Duo, Dentsply) to hybrid materials (Enamic, VITA; Lava Ultimate, 3M ESPE) have been selected. Specimens were prepared with highly polished surfaces in rectangular plate (12 × 12 × 1.2 mm3) or round disc (Ø = 12 mm, thickness = 1.2 mm) geometries. Specimens were tested using the B3B assembly and the biaxial strength was determined using calculations derived from finite element analyses of the respective stress fields. Size effects on strength were determined based on results from 4-point-bending specimens.ResultsA good agreement was found between the biaxial strength results for the different geometries (plates vs. discs) using the B3B test. Strength values ranged from 110.9 MPa (Vitablocs Mark II) to 1303.21 MPa (e.max ZirCAD). The strength dependency on specimen size was demonstrated through the calculated effective volume/surface.SignificanceThe B3B test has shown to be a reliable and simple method for determining the biaxial strength restorative materials supplied as small CAD/CAM blocks. A flexible solution was made available for the B3B test in the rectangular plate geometry.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Dental Materials - Volume 33, Issue 1, January 2017, Pages 99-109
نویسندگان
, , , , , , , ,