کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5460098 | 1516170 | 2017 | 36 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
PbSe mid-IR photoconductive thin films (part I): Phase analysis of the functional layer
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
We could show that after annealing the following layer structure had formed: a bottom layer of PbSe (1 μm) and a top layer of Pb-Se-O-I (400 nm), containing (i) a poly-crystalline and (ii) a nano-crystalline phase. The poly-crystalline phase was found to be a solid solution of Se and I and yielded an average Pb/I mole fraction ratio of 3.1 and Pb/Se of 3.9, respectively. It contained the largest iodine mole fraction of â¼20 at.% while the nano-crystalline phase yielded less iodine (<10 at.%). This proves the great efficiency of the reactive annealing for functionalizing the polycrystalline PbSe films. The d-spacings, the chemical composition and the plasmon energies of the phases were measured and bar code these phases. The quaternary Pb-Se-O-I phases in the top layer have large unit cells and d spacings exceeding 0.8 nm. The poly-crystalline phase yielded two sharp plasmon peaks at 17.2 eV and 23.8 eV, respectively. Therefore, it can be clearly distinguished from PbSe, which yields a plasmon energy of 15 eV and d spacings smaller than 0.353 nm.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Alloys and Compounds - Volume 724, 15 November 2017, Pages 316-326
Journal: Journal of Alloys and Compounds - Volume 724, 15 November 2017, Pages 316-326
نویسندگان
Praveen Kumar, Michael Pfeffer, Eberhard Schweda, Oliver Eibl, Jijun Qiu, Zhisheng Shi,