A method for estimating maximum static rainfall retention in pebble mulches used for soil moisture conservation

- Model of the water into the pores of pebbles based on the absorption of pebbles.
- Model of water adhering to outside surface of pebbles based on properties of water.
- Model of the water between pebbles based on the basic equation of water bridge.
- We proposed a method to estimate maximum static rainfall retention in pebble mulch.
- The model results have been validated by experimental observations.

SummaryMulching of agricultural fields and gardens with pebbles has long been practiced to conserve soil moisture in some semi-arid regions with low precipitation. Rainfall interception by the pebble mulch itself is an important part of the computation of the water balance for the pebble mulched fields and gardens. The mean equivalent diameter (MED) was used to characterize the pebble size. The maximum static rainfall retention in pebble mulch is based on the water penetrating into the pores of pebbles, the water adhering to the outside surfaces of pebbles and the water held between pebbles of the mulch. Equations describing the water penetrating into the pores of pebbles and the water adhering to the outside surface of pebbles are constructed based on the physical properties of water and the pebble characteristics. The model for the water between pebbles of the mulch is based on the basic equation to calculate the water bridge volume and the basic coordination number model. A method to calculate the maximum static rainfall retention in the pebble mulch is presented. Laboratory rain simulation experiments were performed to test the model with measured data. Paired sample t-tests showed no significant differences between the values calculated with the method and the measured data. The model is ready for testing on field mulches.