کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
6603746 1424089 2018 22 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Electrosynthesis of polypyrrole nano/micro structures using an electrogenerated oriented polypyrrole nanowire array as framework
ترجمه فارسی عنوان
الکتروشیمیایی ساختارهای نانو / میکرو پلی پیلور با استفاده از آرایه نانوسیم پلیپیرل الکتروژنراتیو به عنوان چارچوب
ترجمه چکیده
هدف از این مقاله نشان دادن این است که می توان قطر و طول نانوساختار چارچوب تشکیل شده از نانوسیم های پلی پریرول را افزایش داد که توسط روش الکتروشیمیایی بدون قالب بدون استفاده از یک محلول پریول حاوی غلظت بالا آنیون ضعیف اسید و غلظت کم آنیون غیر اسیدی. ابعاد نانوسیم های اولیه با انجام یک الکترود سنتزی اضافی در یک راه حل مونومر "کلاسیک" افزایش می یابد. بسته به زمان پلاریزاسیون این سنتز اخیر (چند ده ثانیه)، سیمهای با قطر های مختلف از صد تا چند صد نانومتر به دست می آیند. علاوه بر تنوع اندازه نانوسیم، این یافته ها، همانطور که در مکانیزم واکنش نشان داده شده است، نشان می دهد که پایه نانوسیم ها توسط یک پلیمر غیر رسانایی نازک و به وسیله یک پلی اریل اکسید شده احاطه شده است. در واقع این مقاله یک اثبات مفهوم را نشان می دهد. در واقع می توان تصور کرد که با استفاده از یک محلول مونومر آلی با استفاده از محلول مونومر آلی، می توان با استفاده از مونومر پیرول کارکرد شده برای ساخت یک سنسور بیولوژیکی با داشتن منطقه خاص خاص و / یا استفاده از آنیون هایی که می تواند مواد مخدر باشد، انجام شود.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی مهندسی شیمی (عمومی)
چکیده انگلیسی
The purpose of this paper is to show that it is possible to increase the diameter and length of the nanostructures of a framework formed of oriented polypyrrole nanowires that has been prepared by a templateless electrochemical method based on the use of a pyrrole solution containing a high concentration of weak-acid anion and a low concentration of non-acidic anion. The dimensions of the initial nanowires are increased by performing an additional electrosynthesis in a 'classical' monomer solution. Depending on the polarization time of this last synthesis (a few tens of seconds), wires with various diameters, from one hundred up to several hundred nanometers, are obtained. In addition to the variation of the nanowire size, these findings confirm, as outlined in the reaction mechanism we have proposed, that the base of the nanowires is surrounded by a thin non-conductive polymer i.e. by an overoxidized polypyrrole film. Actually this paper shows a proof-of-concept. Indeed one can imagine that the second polymeric electrodeposit could be performed using an organic monomer solution, using functionalized pyrrole monomer to fabricate a biosensor having large specific area, and/or using anions which could be drugs.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Electrochimica Acta - Volume 268, 1 April 2018, Pages 66-72
نویسندگان
, , ,