کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6611458 | 459569 | 2015 | 12 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
CO-sensing Properties of Potentiometric Gas Sensors Using an Anion-conducting Polymer Electrolyte and Au-loaded Metal Oxide Electrodes
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
مهندسی شیمی (عمومی)
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: CO-sensing Properties of Potentiometric Gas Sensors Using an Anion-conducting Polymer Electrolyte and Au-loaded Metal Oxide Electrodes CO-sensing Properties of Potentiometric Gas Sensors Using an Anion-conducting Polymer Electrolyte and Au-loaded Metal Oxide Electrodes](/preview/png/6611458.png)
چکیده انگلیسی
CO-sensing properties of potentiometric gas sensors using an anion-conducting polymer (ACP) as an electrolyte and metal oxides loaded with and without Au as electrodes (EC(MO) or EC(nAu/MO(Tm)), respectively, MO: metal oxide (In2O3, ZnO or Co3O4), n: the loading amount of Au, 0.5â¼2.0 wt%, T: heat-treatment temperature, m: heat-treatment atmosphere, air or H2) have been investigated in wet synthetic air (57%RH) at 30 °C. In addition, H2-sensing properties of these sensors have also been investigated in the same gaseous conditions, to evaluate their CO selectivity against H2. All of the EC(MO) sensors showed relatively small changes in electromotive force (EMF), i.e. responses, to both CO and H2, but the Au loading to In2O3 and ZnO drastically improved the magnitude of CO response of the EC(In2O3) and EC(ZnO) sensors, respectively. The EC(2.0Au/In2O3(400air)) sensor showed larger CO response, faster CO response speed, excellent CO selectivity against H2 and better long-term stability than those of the EC(2.0Au/ZnO(400air)) sensor. The influence of moisture on the CO response of the EC(2.0Au/In2O3(400air)) sensor was almost negligible in the humidity range of 40â¼100%RH. The magnitude of CO response of the EC(2.0Au/In2O3(400air)) sensor in wet synthetic air showed a good linear relationship with CO concentration, but the CO response was largely affected by the concentration of O2. These results indicate that the EMF of the EC(2.0Au/In2O3(400air)) sensor is probably determined by the mixed potential resulting from CO oxidation and O2 reduction. The heat-treatment conditions of the 2.0 wt% Au-loaded In2O3 powder largely affected the CO-sensing properties of the EC(2.0Au/In2O3(Tm)) sensors. Among these sensors heat-treated in various conditions, the as-fabricated EC(2.0Au/In2O3(250H2)) sensor showed the most excellent CO selectivity against H2 in their concentration range of 10â¼3000 ppm.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Electrochimica Acta - Volume 166, 1 June 2015, Pages 232-243
Journal: Electrochimica Acta - Volume 166, 1 June 2015, Pages 232-243
نویسندگان
Toshiyuki Goto, Takeo Hyodo, Taro Ueda, Kai Kamada, Kazunari Kaneyasu, Yasuhiro Shimizu,