کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
662395 | 1458185 | 2005 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Erratum to “Validation of the use of heat transfer models in liquid/solid fluidized beds for ice slurry generation” [International Journal of Heat and Mass Transfer 46 (2003) 3683–3695]
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
جریان سیال و فرایندهای انتقال
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In the concerned paper, tube dimensions have been taken from the experimental set-up drawings. Recently, during Wilson plot calibration tests, after extension of the operating range of the set-up, came to light that the tube sizes used were slightly different from what was stated in the drawings. Consequently, published experimental fluidized bed heat transfer coefficients are up to 40% too low and some conclusions had to be adapted. The new, correct experimental heat transfer results show a much better agreement with heat transfer models in literature. The authors of the subjected paper deeply regret the errors. Corrected versions of Sections 4 and 5 of the paper are presented here.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Heat and Mass Transfer - Volume 48, Issue 16, July 2005, Pages 3478–3483
Journal: International Journal of Heat and Mass Transfer - Volume 48, Issue 16, July 2005, Pages 3478–3483
نویسندگان
P. Pronk, J.W. Meewisse, C.A. Infante Ferreira,