Experimental high pressure speed of sound and density of (tetralin + n-decane) and (tetralin + n-hexadecane) systems and thermodynamic modeling

In this work, speed of sound for n-decane, n-hexadecane and tetralin, as well as for binary mixtures involving these hydrocarbons, were determined at pressures of (0.1, 5, 10, 15, 20 and 25) MPa at temperatures of (313.15, 323.15 and 333.15) K at different compositions. Density data at atmospheric pressure for these same systems were measured experimentally at temperatures of (313.15, 323.15 and 333.15) K. From these results and thermodynamic definitions, the following properties were calculated: density at high pressures, excess molar volume and excess isentropic compressibility. Tetralin, n-decane and n-hexadecane are chemicals asymmetrical in shape, length and chemical nature that can be found in naphtha and kerosene fractions. The influence of these differences on the physical properties of these mixtures was then evaluated. Density and speed of sound data were correlated with Prigogine-Flory-Patterson (PFP) equation of state. The PFP model correlated well experimental densities for pure components but did not correlate so well the speed of sound dependency with pressure. The model calculated well excess properties, with correct signs, magnitudes, and the qualitative effect of pressure and temperature on these properties.