کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
683582 | 889002 | 2010 | 8 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Application of 3D scanned imaging methodology for volume, surface area, and envelope density evaluation of densified biomass Application of 3D scanned imaging methodology for volume, surface area, and envelope density evaluation of densified biomass](/preview/png/683582.png)
Measurement of volume, surface area, and density is an essential for quantifying, evaluating, and designing the biomass densification, storage, and transport operations. Acquiring accurate and repeated measurements of these parameters for hygroscopic densified biomass are not straightforward and only a few methods are available. A 3D laser scanner was used as a measurement device and the 3D images were analyzed using image processing software. The validity of the method was verified using reference objects of known geometry and the accuracy obtained was in excess of 98%. Cotton gin trash briquettes, switchgrass pellets, switchgrass cubes, hardwood pellets, and softwood chips were tested. Most accurate results of the volume and surface area required the highest possible resolution of the scanner, which increased the total scan-process times, and image file size. Physical property determination using the 3D scanning and image analysis is highly repeatable (coefficient of variation <0.3%), non-invasive, accurate, and alternative methodology. The various limitations and merits of the developed method were also enumerated.
Journal: Bioresource Technology - Volume 101, Issue 11, June 2010, Pages 4220–4227