Biosorption of pentachlorophenol from aqueous solutions by a fungal biomass

This study focuses on the use of non-viable Aspergillus niger biomass, for the biosorption of pentachlorophenol (PCP) from aqueous solutions. Various forms of the biomass-autoclaved and chemically conditioned, were tested for their potential in the removal of PCP from aqueous solutions. It was found that PCP removal was pH dependent; PCP removal decreased with the increase in pH for all type of biomass, except for cetyltrimethylammonium bromide (CTAB) biomass. For CTAB biomass, a near complete removal of PCP was observed at all pHs. Therefore, CTAB biomass was used in further studies. PCP removal was rapid, with an equilibrium time of 2 h. The rate of adsorption kinetics was well described by a pseudo-second order model. Isotherm models of the type one and two parameter models were found to fit the isotherm data. PCP biosorption was found to be exothermic in nature; the amount of PCP sorbed decreased with an increase in temperature. Desorption was carried out using deionized water, dilute HCl and dilute NaOH, and it was found that most of the PCP was irreversibly bound to the biomass. The addition of inorganic salts did not affect the removal of PCP from aqueous solutions. Among the surface functional groups present on the biomass, carboxyl, amide and hydroxyl groups seem to have played a role in PCP biosorption. It was concluded that CTAB treated biomass was an excellent adsorbent for the removal of PCP from aqueous solutions.