کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7826069 | 1503031 | 2018 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Influence of titania on the morphological and mechanical properties of 1,3-butanediol dimethacrylate based polyHIPE composites
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
شیمی آلی
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Macroporous polymer/TiO2 composites were synthesized by the polymerisation of 1,3-butanediol dimethacrylate (1,3-BDDMA) based water-in-oil high internal phase emulsions. High internal phase emulsions (HIPEs) having 80 vol% of internal phase were used as templates for inducing porosity in the resulting polymer composites. Apart from the monomer, either methyl methacrylate (MMA) or 2-ethylhexyl acrylate (EHA) was used as a co-monomer. In order to investigate the influence of nanoparticle loading on the morphological and mechanical properties of highly porous polymers, 1 to 10â¯wt% of colloidal TiO2 nanoparticles were introduced into emulsion templates. It was found that increasing the amount of nanoparticle loading from 1â¯wt% to 10â¯wt%, average cavity sizes decreased from 14.1â¯Î¼m to 5.9â¯Î¼m in the case of MMA co-monomer, and from 18.6â¯Î¼m to 5.1â¯Î¼m in the case of EHA co-monomer. Moreover, it was found that introducing 1â¯wt% of nanoparticle significantly improved the mechanical properties of both MMA and EHA copolymerized polyHIPEs. In order to explain the influence of nanoparticle loading and comonomer type on the physical properties appropriate regression analyses were conducted.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Reactive and Functional Polymers - Volume 130, September 2018, Pages 8-15
Journal: Reactive and Functional Polymers - Volume 130, September 2018, Pages 8-15
نویسندگان
Elif Yüce, Fatma Nur Parın, Peter Krajnc, H. Hande Mert, E. Hilal Mert,