کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7963131 | 1514140 | 2018 | 17 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Stress levels and failure modes of tantalum-clad tungsten targets at ISIS
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی انرژی
انرژی هسته ای و مهندسی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The ISIS spallation neutron source operates two tantalum-clad targets. Efforts to understand the operating conditions and lifetime limiting factors of these targets are ongoing, driven in part by premature failures of several recent TS2 targets. The Hot Isostatic Press (HIP) process used in target manufacturing is thought to introduce large residual stresses, particularly in the tantalum cladding. In addition, the pre-stressed target materials are subjected to cyclic proton beam heating and irradiation damage during operation. Manufacturing and beam-induced stresses were simulated using finite element analysis. The residual stress simulation results appear largely consistent with the findings from recent neutron diffraction measurements on an ISIS target plate. Simulations of the beam induced cyclic stress in the target, together with the available tantalum fatigue data, indicate that there is a large safety margin on the material fatigue limit and that a fatigue failure in the ISIS target cladding is therefore unlikely.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Nuclear Materials - Volume 506, 1 August 2018, Pages 76-82
Journal: Journal of Nuclear Materials - Volume 506, 1 August 2018, Pages 76-82
نویسندگان
Dan Wilcox, Peter Loveridge, Tristan Davenne, Leslie Jones, David Jenkins,