کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8082773 | 1521595 | 2014 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Optimising in situ gamma measurements to identify the presence of radioactive particles in land areas
ترجمه فارسی عنوان
بهینه سازی اندازه گیری های گاما در محل برای شناسایی حضور ذرات رادیواکتیو در مناطق زمین
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
ذرات داغ، ذرات رادیواکتیو، تشخیص ذرات، بهینه سازی در محل، آلودگی رادیواکتیو،
ترجمه چکیده
نظرسنجی های با وضوح بالا در حین بررسی با گاما، بهترین روش شناسایی نقاط کوچکی از فعالیت، مانند ذرات رادیواکتیو در مناطق زمین است. نظرسنجی های اسکن می توانند نتایج سریع را تولید کنند، اما احتمال اشتباهات منفی کاذب مثبت یا غلط منفی اغلب نامعلوم است و ممکن است سایر معیارها مانند برآورد غلظت فعالیت توده را رعایت نکنند. یک جایگزین این است که برای استفاده از آشکارسازهای گاما قابل حمل که در یک سری از مکان ها در یک الگوی نمونه برداری سیستماتیک نصب شده اند، جایی که هر اندازه گیری مثبت بعدا مورد بررسی قرار گیرد تا مکان دقیق، گستره و ماهیت منبع هدف را تعیین کند. نظرسنجی اولیه به طور معمول با استفاده از تنظیمات ارتفاع آشکارساز، فاصله اندازه گیری و زمان شمارش که براساس راحتی است، به جای استفاده از تنظیمات محاسبه شده برای برآورده شدن الزامات طراحی شده است. این مقاله پایه یک روش تکرار برای تنظیم این پارامترها را در ابتدای یک نظرسنجی معرفی می کند، برای احتمال های پیش بینی شده از اشتباهات منفی کاذب مثبت و منفی کاذب در مکان های کوچک ذرات رادیواکتیو کوچک در مناطق زمین. نشان داده شده است که یک آشکارساز بدون کولیمیت مؤثرتر از یک آشکارساز کولیمیت است که به طور معمول در این زمینه می تواند مورد استفاده قرار گیرد.
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی انرژی
انرژی هسته ای و مهندسی
چکیده انگلیسی
High-coverage in situ surveys with gamma detectors are the best means of identifying small hotspots of activity, such as radioactive particles, in land areas. Scanning surveys can produce rapid results, but the probabilities of obtaining false positive or false negative errors are often unknown, and they may not satisfy other criteria such as estimation of mass activity concentrations. An alternative is to use portable gamma-detectors that are set up at a series of locations in a systematic sampling pattern, where any positive measurements are subsequently followed up in order to determine the exact location, extent and nature of the target source. The preliminary survey is typically designed using settings of detector height, measurement spacing and counting time that are based on convenience, rather than using settings that have been calculated to meet requirements. This paper introduces the basis of a repeatable method of setting these parameters at the outset of a survey, for pre-defined probabilities of false positive and false negative errors in locating spatially small radioactive particles in land areas. It is shown that an un-collimated detector is more effective than a collimated detector that might typically be used in the field.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Environmental Radioactivity - Volume 138, December 2014, Pages 162-169
Journal: Journal of Environmental Radioactivity - Volume 138, December 2014, Pages 162-169
نویسندگان
Peter D. Rostron, John A. Heathcote, Michael H. Ramsey,