Decoloration of textile dyes by alginate-immobilized Trametes versicolor

Decoloration rates were faster with lower viscosity (less than 2000 cps) alginates and with softer beads which had a lower resistance to compression. Fungal colonization of the beads resulted in higher biomass concentrations with a corresponding higher decoloration rate but the beads became larger, had a lower resistance to compression and a higher percentage of bead breakage in a stirred tank reactor. Biomass, recovered from beads in which there was no growth, could be dispersed while the biomass from colonized beads formed a hollow, spherical shell due to growth on and near the bead surface and no growth in the bead interior. If alginate-immobilized T. versicolor is to be used in a stirred tank reactor, a high biomass loading during the immobilization phase and no fungal growth in the beads is recommended to have high decoloration rates and low bead breakage.