Grain boundary embrittlement by Mn and eutectoid reaction in binary Fe-12Mn steel

The grain boundary embrittlement in a binary Fe-12Mn is due to the grain boundary segregation of Mn. During tempering at 400 °C (higher than the equilibrium eutectoid reaction temperature 247 °C), reverted austenite particles were formed at lath and grain boundaries through the equilibrium reaction of lath martensite to ferrite + austenite. Surprisingly, hydrostatic pressure, which is induced by the transformation of epsilon martensite to austenite during heating at the tempering temperature, resulted in the nonequilibrium eutectoid reaction producing α-Mn precipitates at the interface between lath martensite and the transformed austenite during the tempering. The segregation concentration kinetics of Mn formed a convex profile due to the active grain boundary precipitation of the reverted austenite particles and the α-Mn particles, which act as a sink for the segregated Mn. Finally, the convex segregation profile of Mn corresponded to the concave profile of intergranular fracture strength.