کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10620514 | 988634 | 2012 | 12 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
In situ measurement and modelling of austenite grain growth in a Ti/Nb microalloyed steel
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: In situ measurement and modelling of austenite grain growth in a Ti/Nb microalloyed steel In situ measurement and modelling of austenite grain growth in a Ti/Nb microalloyed steel](/preview/png/10620514.png)
چکیده انگلیسی
Using a novel laser ultrasonics technique in situ measurements of austenite grain growth were conducted during continuous heating (10 °C sâ1) and subsequent isothermal holding at various temperatures in the range 950-1250 °C in a microalloyed linepipe steel. Based on the experimental results, a grain growth model was developed, which includes the pinning effect of precipitates present in the steel. Analyzing the grain growth behaviour and using the advanced thermo-kinetic software MatCalc, an approach was developed to estimate the initial distribution of precipitates in the as-received material and their dissolution kinetics. The evolution of the volume fractions and mean particle sizes of NbC and TiN leads to a time-dependent pinning pressure that is coupled with the proposed grain growth model to successfully describe the observed kinetics of austenite grain growth. The predictive capabilities of the model are illustrated by its application to independent grain growth data for rapid heat treatment cycles that are typical of the weld heat affected zone.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Acta Materialia - Volume 60, Issue 3, February 2012, Pages 1015-1026
Journal: Acta Materialia - Volume 60, Issue 3, February 2012, Pages 1015-1026
نویسندگان
M. Maalekian, R. Radis, M. Militzer, A. Moreau, W.J. Poole,