کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1197248 | 1492965 | 2015 | 12 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Application of pyrolysed agricultural biowastes as adsorbents for fish anaesthetic (MS-222) removal from water Application of pyrolysed agricultural biowastes as adsorbents for fish anaesthetic (MS-222) removal from water](/preview/png/1197248.png)
• Adsorbents were produced by agricultural biowastes pyrolysis without activation.
• Produced adsorbents were tested for the removal of MS-222 from water.
• Pyrolysed peanut shell has the maximum adsorption capacity.
• Pyrolysed paper mill sludge resulted in a fast kinetic but low adsorption capacity.
• Biochars could be an excellent choice for the removal of fish anaesthetics.
This work aims to test the adsorption process for the removal of the fish anaesthetic MS-222 from water using biochars obtained from agricultural biowastes (Eucalyptus bark, peanut shells, walnut shells, peach stones, grape seeds and olive waste) as adsorbents. An industrial residue (primary paper mill sludge) and a commercial activated carbon were tested for comparison purposes. The starting materials and the resulting biochars were characterized by elemental and proximate analyses, total organic carbon, FTIR, 13C and 1H solid state NMR, and SEM. Also, specific surface area and porosity of biochars were determined. Then, batch kinetic and equilibrium experiments were performed on the adsorption of MS-222 onto the different produced biochars. The fastest kinetic was obtained using primary sludge pyrolysed (30 min to equilibrium attainment) and the highest biochars adsorption capacity was obtained using peanut shells (34 mg g−1 of maximum adsorption capacity, predicted by the Langmuir–Freundlich model). Commercial activated carbon reaches 349 mg g−1 of maximum adsorption capacity, as predicted by Langmuir model.
Journal: Journal of Analytical and Applied Pyrolysis - Volume 112, March 2015, Pages 313–324