Magnetic beads-based immunoassay as a sensitive alternative for atrazine analysis

A new immunoassay strategy for sensitive atrazine determination based on magnetic beads is reported. The immuno-method is a competitive solid-phase immunoassay where the anti-atrazine antibody is immobilized on the magnetic beads surface and fixed at the reaction cell bottom using a simple magnet, which generates a magnetic field. Analyte and HRP (horseradish peroxidase) tracer compete for active sites of antibody. After the immunointeractions antibody-analyte and antibody-tracer, atrazine quantification from the sample is performed by injection of the chemiluminescence substrate (luminol, hydrogen peroxide and p-iodophenol). Different antibodies (polyIgG anti-atrazine Ab I and affinity purified polyIgG anti-atrazine AbI) were tested in this configuration. Also, optimum concentration of antibody-covered magnetic beads was set up (8 mg/l Ab II). Finally, the performance of magnetic beads-based immunoassay for atrazine determination was evaluated demonstrating that the magnetic beads-based immunoassay is one of the most sensitive method for atrazine determination (LoD = 3 pg/l, IC50 = 37 pg/l, DR = 10–1000 pg/l).