Experimental study on mitigating the cathode flooding at low temperature by adding hydrogen to the cathode reactant gas in PEM fuel cell

Severe flooding can be critical in a fuel cell vehicle operating at a high current density, and in a fuel cell vehicle at the initial stage of start up. It is often difficult to remove the condensed water from the cathode gas diffusion layer (GDL) of the fuel cell because of the surface tension between the water and the GDL. In this research, in order to remove the condensed water from the cathode GDL, a small amount of hydrogen was injected into the cathode reactant gases. The results showed that the hydrogen addition method successfully removed the liquid water from the cathode GDL. Water removal was verified for various hydrogen flow rates and hydrogen addition durations. Furthermore, the dew point temperature of the outlet gas at the cathode was observed to determine the amount of water removed from the cathode GDL. In addition, the water droplet in the cathode gas flow channel was visualized by using a transparent cell. Furthermore, degradation tests are also performed. Considering the degradation test, the hydrogen addition method is expected to be effective in mitigating cathode flooding.

► We study on the method of mitigating GDL flooding in cathode by injecting hydrogen.
► The result was identified by dew point hygrometer, voltage and using visualized cell.
► The damage of catalyst was not serious considering the hydrogen addition duration.
► Hydrogen addition is effective method on the flooding mitigation at low temperature.