Fractographic analyses of all-ceramic crowns: A study of 27 clinically fractured crowns

ObjectivesThe use of all-ceramic restorations has been steadily increasing in the decades since the introduction of high-strength core ceramics as an alternative to metal cores. Even with high-strength ceramic cores, the crowns are susceptible to fractures during clinical function, probably the major concern associated with all-ceramic restorations. The aim of this study was to analyze fracture features of clinically fractured crowns in order to determine crack initiation sites and crack propagation paths.MethodsFractographic methods were used to analyze 27 all-ceramic full coverage crowns with alumina cores and feldspatic veneering ceramic. The fractured crowns were supplied by dentists in private and public practices with information of type of cement and time in function if available.ResultsThe fractured crowns comprised 13 incisors, 3 premolars and 11 molars. The results revealed that all fractures initiated in the cervical margin of the crowns and usually from the approximal area close to the most coronally placed curvature of the margin. There was no statistically significant association between the cement used and time in function.SignificanceFractography of clinically failed all-ceramic crowns can provide information on the fracture modes and design considerations. The findings are in contrast to fracture modes from in vitro tests. The results suggest that more clinically relevant in vitro test methods to study the durability of ceramic crowns should be developed.