کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1450997 | 988753 | 2006 | 14 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Proposal and use of a void model for the simulation of inner fracture defect in drawing
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In a previous paper [Komori K. Acta Mater 1999;47:3069], a new model of void coalescence, which was derived with reference to the Thomason model of void coalescence based on internal necking, was proposed and proved to be effective in the simulation of the drawing of copper. In this study, the simulation of the drawing of four kinds of carbon steel is performed using our proposed model. First, the two void shapes and two void configurations in our previous study are unified into one void shape and one void configuration to improve the proposed model. Then the analysis and the experiment of drawing are performed, and the validity of our proposed model is clarified by comparing the analytical results with the experimental results.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Acta Materialia - Volume 54, Issue 16, September 2006, Pages 4351–4364
Journal: Acta Materialia - Volume 54, Issue 16, September 2006, Pages 4351–4364
نویسندگان
Kazutake Komori,