کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1714281 | 1519938 | 2015 | 15 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Experimental results of a Terrain Relative Navigation algorithm using a simulated lunar scenario Experimental results of a Terrain Relative Navigation algorithm using a simulated lunar scenario](/preview/png/1714281.png)
• An experimental algorithm is used to navigate over a simulated lunar scenario.
• Infrared sensors are used like distance sensors to simulate altimeters.
• A nonlinear transfer function has been optimized to deal with the sensors׳ errors.
• A switch strategy between sensors with different and overlapping ranges has been implemented.
• A detailed Digital Elevation Model has been used to choose a safe landing site.
This paper deals with the problem of the navigation of a lunar lander based on the Terrain Relative Navigation approach. An algorithm is developed and tested on a scaled simulated lunar scenario, over which a tri-axial moving frame has been built to reproduce the landing trajectories. At the tip of the tri-axial moving frame, a long-range and a short-range infrared distance sensor are mounted to measure the altitude. The calibration of the distance sensors is of crucial importance to obtain good measurements. For this purpose, the sensors are calibrated by optimizing a nonlinear transfer function and a bias function using a least squares method. As a consequence, the covariance of the sensors is approximated with a second order function of the distance. The two sensors have two different operation ranges that overlap in a small region. A switch strategy is developed in order to obtain the best performances in the overlapping range. As a result, a single error model function of the distance is found after the evaluation of the switch strategy. Because of different environmental factors, such as temperature, a bias drift is evaluated for both the sensors and properly taken into account in the algorithm. In order to reflect information of the surface in the navigation algorithm, a Digital Elevation Model of the simulated lunar surface has been considered. The navigation algorithm is designed as an Extended Kalman Filter which uses the altitude measurements, the Digital Elevation Model and the accelerations measurements coming from the moving frame. The objective of the navigation algorithm is to estimate the position of the simulated space vehicle during the landing from an altitude of 3 km to a landing site in the proximity of a crater rim. Because the algorithm needs to be updated during the landing, a crater peak detector is conceived in order to reset the navigation filter with a new state vector and new state covariance. Experimental results of the navigation algorithm are presented in the paper.
Journal: Acta Astronautica - Volume 116, November–December 2015, Pages 78–92