Electrostatically inflated gossamer space structure voltage requirements due to orbital perturbations

This paper explores the concept of using electrostatic forces for deployment of gossamer space structures. The Electrostatically Inflated Membrane Structure (EIMS) uses two conducting membranes that are interconnected through membrane ribs. An absolute electrostatic charge is applied to the structure through active charge emission. This causes repulsion between layers of lightweight membranes that inflates the EIMS system and tensions the membranes. Assuming positive tensions, the EIMS system is modeled as a rigid system. Typical orbital perturbations are considered such as solar radiation pressure, differential gravity, and atmospheric drag which may compress the structure leading to shape destabilization. Restricting the analysis in this paper to flat membranes, the minimum potentials required to exactly compensate for the worst case scenario of differential solar radiation pressure at geostationary altitudes are estimated to be on the order of hundreds of volts. In low Earth orbit, voltage magnitudes of several kilovolts are required to reach an inflation pressure to offset the normal compressive drag pressure.

► A novel inflation method for gossamer spacecraft structures is proposed.
► Absolute electrostatic charge on membranes provides inflationary pressure.
► A few kilovolts required to offset normal orbit perturbations to maintain inflation.