Mit castor satellite: Design, implementation, and testing of the communication system

Cathode Anode Satellite Thruster for Orbital Reposition (CASTOR) is an orbital manoeuvre and transfer micro-satellite bus developed at MIT Space System Laboratory. The technical objective of the mission is achieving 1 km/s of delta-V over a 1 year mission in Low Earth Orbit (LEO). This will be accomplished using a novel electric propulsion system, the Diverging Cusped Field Thruster (DCFT), which enables high efficiency orbital changes of the ESPA-ring class satellite. CASTOR is capable of improving rapid access to space capabilities by providing an orbital transfer platform with a very high performance to mass ratio, thus greatly reducing launch costs and allowing for highly efficient orbital manoeuvre. Furthermore, CASTOR is highly scalable and modular, allowing it to be adapted to a wide range of scales and applications. CASTOR is developed as part of the University Nanosatellite Program (UNP) funded by Air Force Research Laboratory (AFRL).In order to accomplish CASTOR mission objective, a highly optimized, scalable, light weight, and low cost communication system needed to be developed. These constraints imply the development of trade studies to select the final communication system architecture able to maximize the amount of data transmitted, while guaranteeing reliability, redundancy and limited mass, power consumption, and cost. A special attention is also required to guarantee a reliable communication system in cases of tumbling, or in case of strong Doppler shift which is inevitable due to the high delta-V capabilities of the vehicle. In order to accomplish all the mission requirements, different features have been introduced in the design of the communication system for this mission. Specifically, customized patch antennas have been realized, and a customized communication protocol has been designed and implemented. The communication subsystem has been validated through an intense testing campaign which included software tests in the laboratory, hardware tests in anechoic chamber, and in flight tests through a balloon experiment.The article presents an overview of CASTOR mission, a presentation of the trade studies analysis and of the final communication architecture selected, a description of the customized antenna developed, of the customized protocol designed, and a presentation of the results of the tests performed.

► The article describes implementation, design, and tests of the communication system.
► The communication system developed is of low cost, low mass and low power consumption.
► The system is optimized to accomplish all requirements.
► The ARQ customized protocol developed is a hybrid between selective repeat and go-back.
► The ARQ protocol achieves efficiency and also reliability for the link.