NETLANDER thermal control

The intention of the NETLANDER mission, is to establish for the first time a Network of stations on the surface of Mars. Four identical surface modules are equipped with science payloads dedicated to study the atmosphere and geosphere of Mars at four different landing locations spread over the two hemispheres. The mission duration will be one Martian year. The surface modules and their sensitive electronics compartments have to withstand a wide range of hostile conditions on Mars. Further constraints are given during flight, where heat can be exchanged only across small interfaces. The purpose of the NETLANDER thermal control system is to maintain the electronics and battery temperatures within a narrow band. Contrasting demands of reduced heat leaks and effective dump of surplus heat require new technologies and advanced design concepts to be satisfied under strict mass limits imposed. Recently, the first thermal test model with the original thermal equipment has been completed and tested. The model includes a high performance insulation combined with an innovative loop heat pipe system integrated into a one-to-one lander-structure. The paper describes the design and development activities as well as the ground test campaign performed in simulated Martian environment.