Experimental investigation and modelling of tritium washout by precipitation in the area of the nuclear power plant of Paks, Hungary

Tritium occurs in nature in trace amounts, but its concentration is changing due to natural and artificial sources. Studies focusing on natural tritium have to take into account the effect of artificial sources. Also, the impact of tritium is an important issue in environmental protection, e.g. in connection with the emissions from nuclear power plants. The present work focuses on the rain washout of tritium emitted from the Paks nuclear power plant in Hungary. Rainwater collectors were placed around the plant and after a period of precipitation, rainwater was collected and analysed for tritium content. Samples were analysed using low-level liquid scintillation counting, with some also subject to the more accurate 3He ingrowth method. The results clearly show the trace of the tritium plume emitted from the plant; however, values are only about one order of magnitude higher than environmental background levels. A washout model was devised to estimate the distribution of tritium around the plant. The model gives slightly higher concentrations than those measured in the field, but in general the agreement is satisfactory. The modelled values demonstrate that the effect of the plant on rainwater tritium levels is negligible over a distance of some kilometres.

Research highlights
► The rainwater around a nuclear power plant was collected with a special rainwater collector
► The rainwater after a rain event was analysed for tritium with LSC and with the helium ingrowth method.
► The trace of the tritium plume is clearly detectable in the rainwater.
► The agreement between a reversible washout model and experimental data is satisfactory.
► According to the model the tritium plume is hardly detectable over some kilometers from the plant