کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1754338 | 1522664 | 2006 | 18 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Application of X-ray computed tomography for analyzing cleat spacing and cleat aperture in coal samples Application of X-ray computed tomography for analyzing cleat spacing and cleat aperture in coal samples](/preview/png/1754338.png)
New techniques to determine distributions of cleat aperture, cleat orientation and cleat spacing from CT scans have been developed. For cleat orientation and spacing distributions, two different coal blocks were scanned. The CT scans have been analyzed for the three orthogonal directions. Histograms of the cleat orientations are bimodal, expressing the typical cleat texture of face and butt cleats and bedding perpendicular relaxation fractures. Deviations up to 20° from the peak values in the cleat orientation distributions were used as input for automated image analysis of cleat spacing. Distributions of the cleat spacing measurements are related to the face and butt cleat directions. The term “relevant cleat length” is introduced as a measure to extract the amount of cleat length involved with the cleat spacing measurements. The ratio ranges from 0.03 to 0.38 and expresses the difference in cleat texture in both samples. Cleat spacing versus relevant cleat length shows sample specific patterns for face cleat, butt cleat and bedding. To describe cleat aperture quantitatively, peak height and missing attenuation have been used. The image of a cleat was seen as a convolution of a rectangular fracture profile with a Gaussian point spread function.
Journal: International Journal of Coal Geology - Volume 68, Issues 3–4, 2 October 2006, Pages 205–222