Preliminary studies concerning subsurface probes for the exploration of icy planetary bodies

It is well-known that the permanent terrestrial ice sheets (glaciers and polar caps) contain a lot of information about the recent geological history and in particular about climatic changes. Extrapolating this fact to other ice sheets in the solar system (e.g. the Mars polar regions, the icy moons of the outer planets, etc.), we may expect a similar wealth of information. To obtain this information it is possible to drill holes or melt the ice by a heated probe, which in this way is able to penetrate the surface and investigate the deeper layers in situ. In the latter case the driving agent is the heating power and the weight of the probe. In this paper we consider the application of such “melting probes” for exploring the structure of ice sheets in extraterrestrial environments. We describe several laboratory experiments with simple melting probes performed under cryo-vacuum conditions and compare the results with tests in a terrestrial environment. The experiments revealed that under space conditions the downward motion of a heated probe in an ice sheet is characterized by intermittent periods of sublimation and melting of the surrounding ice, sometimes interrupted by periods where a part of the probe's outer surface is frozen to the surrounding ice. This leads to a temporary blocking of the probe's downward motion. A similar situation can occur when the trailing tether is frozen in behind the probe. During the periods of ice sublimation the penetration process is significantly more power consuming, due to the large difference between the latent heat of sublimation and the latent heat of melting for water ice.