Electrochemically instantaneous reduction of conducting polyaniline-coated latex particles dispersed in acidic solution

A cathodic voltammetric wave was observed in an aqueous suspension of mono-dispersed, spherical polyaniline-coated polystyrene particles, whereas no anodic wave was detected. This irreversibility was common to particles with eight different diameters ranging from 0.2 to 7.5 μm. Such irreversibility cannot be found at polyaniline-coated electrodes, and thus is a property of the dispersion of polyaniline latex. The reduction current was controlled by diffusion of dispersed particles. The reduction, being the conversion from the electrical conducting state to the resistive one, should begin at a point of contact between the conducting particle and the electrode in order to be propagated to the whole particle rapidly. In contrast, the oxidation proceeds slowly with the propagation of conducting zone, during which Brownian motion lets the particle detach from the electrode. The number of loaded aniline units per particle, determined by weight analysis, ranged from 6 × 106 (Ø 0.2 μm) to 3 × 1011 (Ø 7.5 μm) and was proportional to 2.9 powers of the particle diameter. The diffusion-controlled current of the cathodic wave was proportional to 2.4 powers of the diameter. The difference in these powers, 0.5, agreed with a theoretical estimation of the diffusion-controlled current, the diffusion coefficient for which was given by the Stokes–Einstein equation.