DSA to grow electrochemically active biofilms of Geobacter sulfurreducens

Biofilms of Geobacter sulfurreducens were grown on graphite and on dimensionally stable anodes (DSA) in medium that did not contain any soluble electron acceptor. Several working electrodes were individually addressed and placed in the same reactor to compare their electrochemical behaviour in exactly the same biochemical conditions. Under constant polarization at 0.20 V versus Ag/AgCl, the electrodes were able progressively to oxidize acetate (5 mM), and average current densities around 5 A m−2 and 8 A m−2 were sustained for days on DSA and graphite, respectively. Removing the biofilm from the electrodes led the current to zero, while changing the medium by fresh one did not disturb the current when contact to air was avoided. This confirmed that the biofilm was fully responsible for the electro-catalysis of acetate oxidation and the current was not due to the accumulation of compounds in the bulk. Cyclic voltammetries performed during chronoamperometry indicated that the oxidation started above 0.05 V versus Ag/AgCl. The difference in maximal current values obtained with DSA and graphite was not linked to the biofilm coverage ratios, which were of the same order of magnitude in the range of 62–78%. On the contrary, the difference in maximal current values matched the ratio of the average surface roughness of the materials, 5.6 μm and 3.2 μm for graphite and DSA, respectively.