Separation of glycerol from FAME using ceramic membranes

International standards (e.g., ASTM D6751 and EN14214) limit the presence of free glycerol in biodiesel. The traditional water wash method for removing glycerol from crude fatty acid methyl esters (FAME) obtained in the production of biodiesel results in waste waters that cannot be readily discharged. To circumvent the water wash purification method, a membrane separation system using ceramic membranes was designed, constructed and tested for the removal of glycerol from crude FAME from a biodiesel production process. Ceramic membranes in the ultrafiltration (0.05 μm) and microfiltration (0.2 μm) ranges were tested at three different operating temperatures: 0, 5 and 25 °C. All runs separated glycerol from the crude FAME. International standards for glycerol content in biodiesel were met after 3 h when utilizing the ultrafiltration membrane setup at 25 °C with a concentration factor greater than 1.6.

► Biodiesel must meet international standards for free glycerol content.
► Current methods for removing free glycerol from FAME results in toxic waste waters.
► We developed a ceramic membrane separation process for free glycerol removal.
► Best performance was achieved at 25 °C in the ultrafiltration range.
► International free glycerol standards were met.