کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
213559 | 462110 | 2007 | 5 صفحه PDF | دانلود رایگان |

Ammonium paratungstate was prepared from tungsten alloy swarf employing anodic dissolution in sodium hydroxide using a packed bed configuration followed by chemical conversion into ammonium tungstate through tungstic acid. The alkaline tungstate solution was dialysed to recover sodium hydroxide, which could be recycled to the electrolytic dissolution. The influence of anodic current density and other parameters on dissolution/recovery was studied and discussed. It was observed that a current density of 600 mA/100 g scrap could be applied when the concentration of NaOH was maintained around 2.5 M. The energy consumption for anodic dissolution was 2.14 kWh/kg W with more than 90% recovery achieved. XRD studies indicated that the exhausted scrap contained an alloy of nickel and iron with a very low percentage of tungsten. APT sample prepared through anodic dissolution in NaOH was characterized.
Journal: Hydrometallurgy - Volume 85, Issues 2–4, March 2007, Pages 67–71