Effects of root dentin surface coating with all-in-one adhesive materials on biofilm adherence

ObjectivesSealing of exposed root dentinal surfaces with adhesive materials is expected to be a promising approach for preventing root dentin caries. The aim of this study was to evaluate the effects of surface coating with all-in-one adhesives on inhibiting Streptococcus mutans biofilm attachment.Materials and methodsBovine root dentin was cut and ground with #600-grit SiC paper. Each of the three all-in-one adhesives, Hybrid Bond (HB), Reactmer Bond (RB) or Shake One (SO) was single-coated on the dentin surfaces according to the manufacturers’ instructions. The dentin surface without coating served as the control. The surface roughness of the coated and non-coated dentin surfaces was recorded by means of laser microscope measurements. S. mutans artificial biofilms were then grown on the surface of each specimen in a microcosm for 20 h. The amounts of bacteria and water insoluble glucan in the retained biofilm on the surface of the specimens were measured. All numerical data were statistically analyzed using one-way ANOVA & Tukey's HSD (p < 0.05).ResultsAll of the coated groups showed significantly lower susceptibility to biofilm attachment compared with the non-coated root dentin (p < 0.05). Among the coated groups, SO showed the lowest susceptibility for biofilm formation.ConclusionsThree all-in-one adhesive materials could be effective for root surface coating. A fluoride-releasing adhesive, SO demonstrated the strongest potentiality in resisting biofilm formation.