کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
45743 | 46421 | 2015 | 12 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Highly loaded well dispersed stable Ni species in NiXMg2AlOY nanocomposites: Application to hydrogen production from bioethanol Highly loaded well dispersed stable Ni species in NiXMg2AlOY nanocomposites: Application to hydrogen production from bioethanol](/preview/png/45743.png)
• Facile preparation of NiXMg2AlOY nanocomposites with small nanoparticles (4–6 nm).
• At 300 °C stable H2 production of 3.0 mol molEtOH−1 without CO.
• In high concentration of ethanol, stable co-generation of H2 and nanofibrous carbon.
• Active site involves anionic vacancies and cations in close interactions.
Inexpensive NiXMg2AlOY nanocomposites with high Ni content (Ni wt% > 40%) are developed as efficient catalysts for the sustainable hydrogen production from a mixture of ethanol and water at low temperature. The NiXMg2AlOY nanocomposites are composed of small and uniform nanoparticles (4–6 nm) of NiO, Ni–Mg–(Al)–O and/or MgO. The strong interactions existing between Ni2+ cations and Mg2+ and/or Al3+ cations either in the Ni–Mg–(Al)–O solid solution and/or at the interface of nanoparticles of NiO and/or Ni–Mg–(Al)−O make the catalyst highly active and stable. The behavior of the solids is analyzed in the presence of low and high concentrations of ethanol while maintaining a H2O/EtOH molar ratio of 3. The NiXMg2AlOY catalysts are shown to be efficient toward H2 production between 250 and 650 °C. In the presence of low concentration of ethanol, on the highly loaded Ni compound (Ni12Mg2AlOY), total conversion of ethanol is obtained at 250 °C without formation of CO and carbon, and at 300 °C a H2 yield of 3 mol molEtOH−1 is obtained without the formation of CO, exhibiting a remarkable stability with the time on stream even if some carbon is formed. In high concentration of ethanol, total conversion of ethanol is obtained at 450 °C on the highly loaded Ni compound (Ni12Mg2AlOY). In such conditions, a stable co-generation of carbon nanofibrous materials which amount increases with Ni content is also obtained. The catalytic stability is related to the type and morphology of the carbon species formed. The correlations among the catalyst properties, the catalytic performances and the characterizations are thoroughly discussed.
Figure optionsDownload as PowerPoint slide
Journal: Applied Catalysis B: Environmental - Volumes 166–167, May 2015, Pages 485–496