Niobium-containing MCM-41 silica catalysts for biodiesel production

This research focuses on the synthesis and characterization of mesoporous niobosilicate molecular sieves and their catalytic activity in biodiesel production by transesterification of sunflower oil with methanol. Catalysts were prepared by two procedures: impregnation of a MCM-41 silica with different amounts of niobium oxalate and subsequent calcination, and structural incorporation of Nb into a MCM-41 silica during the synthesis step. Characterization techniques such as XRD, XPS, TEM, NH3-TPD and N2 sorption have been employed to characterize the synthesized catalysts. The biodiesel yield increases with the catalyst acidity, attaining a value of 95% with a 7.5 wt% of a MCM-41 silica impregnated with a 8% of Nb2O5, at 200 °C, after 4 h of reaction and a methanol/oil molar ratio of 12. The potential of this family of catalysts to treat low-grade oils has been demonstrated by increasing the acidity of the sunflower oil by adding oleic acid (1.1 wt%) and water (0.2 wt%) to the reaction mixture, since the biodiesel yield is maintained close to 80%. Moreover, the catalyst reutilization has been demonstrated during five catalytic runs by employing a low-grade oil, with no leaching of the active phase.

Niobium-containing MCM-41silica catalysts are very active in the methanolysis of sunflower oil at 200 °C, even in the presence of an acidity of 1.1 wt% and 0.2 wt% water, without leaching.Figure optionsDownload as PowerPoint slideHighlights
► Nb2O5 containing mesoporous silica is active for the acid-catalyzed biodiesel production.
► The catalysts can be reutilized, without leaching of the active phase.
► They catalyze the methanolysis of triglycerides, even in the presence of water and FFA.