Salt diapirism driven by differential loading — Some insights from analogue modelling

We applied scaled physical analogue experiments to investigate the early development of salt diapirs induced by differential sedimentary loading in an intra-continental basin realm (e.g. the North German Basin). During the experiments, deformation in a salt-analogue viscous layer was initiated by variations in the thickness of an overlying brittle material and subsequent accumulation of the brittle material further sustained deformation. A 2D optical image correlation system was used to monitor the strain evolution in the salt analogue material. Our models indicate that the formation of salt pillow structures can be achieved by minimum variations in the overburden loading. The increase of differential loading by adding synkinematic layers in the subsided areas causes not only an active piercing of the viscous layer through the brittle overburden but also an additional uplift in the adjacent areas. These elevations, named “secondary structures”, act as origins for a successive generation of diapirs. Consequently, an initial perturbation of the salt–sediment-interface can lead to a lateral propagation temporally shifted diapirs. The linkage between primary and secondary structures is reflected in the synkinematic overburden layers such as overlapping peripheral sinks in the transition zone between two diapirs. These sinks, in turn, are a frequently observable phenomenon around salt structures of the North German basin indicating that “secondary diapirism” is an underestimated process – besides regional tectonic stresses – influencing the evolution of salt structures.

► Small differences in the load of the sedimentary cover can efficiently induce early salt movement.
► The further growth of salt structures requires synkinematic sedimentation in the peripheral sinks.
► The increasing load gradient on the salt top due to synkinematic sedimentation causes the formation of additional diapirs.