کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5208703 | 1382600 | 2011 | 32 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
When emulsification meets self-assembly: The role of emulsification in directing block copolymer assembly
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
PAAptBAPGMAPluronic F108PCEAFITC-dextranPEO-b-PCLRESTETPPOPFOBPLAAFMDCMTHFPVAPLGASDSCTABO/W - O / WW/O - W / OConfinement effects - اثرات سقوطcetyl trimethylammonium bromide - استاتیم ترتیل آمونیوم برومیدEmulsification - امولسیونWater-in-oil emulsion - امولسیون آب در روغنOil-in-water emulsion - امولسیون نفت در آبTem - این استSelf-assembly - خودآموزیDouble emulsions - دوز امولسیونDecahydronaphthalene - دکائیدرونفالنDichloromethane - دیکلورمتانStem - ساقهsodium dodecyl sulfate - سدیم دودسیل سولفاتreticulo-endothelial System - سیستم رتیکولواندوتلیالX-ray photoelectron spectroscopy - طیف سنجی فوتوالکتر اشعه ایکسXPS - طیف نگاری فوتوالکترونی اشعه ایکسFluorescein isothiocyanate-dextran - فلوورسسین ایزوتوسیانات-دکسترانDirected assembly - مؤسسه هدایت شدهSEM - مدل معادلات ساختاری / میکروسکوپ الکترونی روبشیScanning electron microscopy - میکروسکوپ الکترونی روبشیTransmission electron microscopy - میکروسکوپ الکترونی عبوریSTEM, scanning transmission electron microscopy - میکروسکوپ الکترونی عبوری روبشیatomic force microscopy - میکروسکوپ نیروی اتمیPerfluorooctyl bromide - پرتو فلوراکتیل برومیدPoly(propylene oxide) - پلی (اکسید پروپیلن)Poly(butadiene) - پلی (بوتادین)Poly(tert-butyl acrylate) - پلی (ترتل-بوتیل اکریلات)poly(lactide-co-glycolide) - پلی (لاکتید کگلی کولید)Poly(lactic acid) - پلی (لاکتیک اسید) PMMA - پلی (متیل متاکریلات) Poly(methyl methacrylate) - پلی (متیل متاکریلات)poly(ethylene oxide) - پلی اتیلن اکسیدPoly(ethylene glycol) - پلی اتیلن گلایکول poly(acrylic acid) - پلی اکریلیک اسیدPoly(vinyl alcohol) - پلی وینیل الکل)PEG - پلیاتیلن گلیکول Polystyrene - پلیاستایرن PEO - پیوBlock copolymers - کوپلیمرهای بلوک
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
شیمی آلی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Emulsification is used to generate spherical particles or droplets of immiscible liquids, while block copolymer self-assembly yields a wide variety of nanostructures. The combination of these two methodologies can yield a variety of structures that would not be otherwise observed. The emulsification/solvent evaporation process provides a powerful means to direct block copolymer assembly. Various factors arising from the emulsification can direct the block copolymer assembly, such as confinement effects, interfacial tension, as well as other conditions. In this review, various emulsification techniques are discussed, such as oil-in-water emulsions, double emulsions, as well as the use of microfluidic devices. While emulsification-induced self-assembly may be used to control internal morphologies as well as overall shapes of particles, it also lends a convenient method for controlling surface structures. Examples of exotic structures that may be obtained through the use of these techniques will be described. Also, ways in which morphologies may be controlled using these methods will be discussed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Progress in Polymer Science - Volume 36, Issue 9, September 2011, Pages 1152-1183
Journal: Progress in Polymer Science - Volume 36, Issue 9, September 2011, Pages 1152-1183
نویسندگان
Ian Wyman, Gabriel Njikang, Guojun Liu,