The effect of adding a commercial phytosterol ester mixture on the phase behavior of palm oil

- Pure commercial phytosterol ester mixture shows two different ordered structures.
- Peaks in DSC curves linked to different polymorphic forms.
- Morphology maps summarize structural information.
- Binary system shows eutectic characteristics.

The objective of this study was to investigate in depth the non-isothermal crystallization and melting behavior of binary blends of palm oil (PO) with a commercial, multi-component phytosterol ester (PE) mixture. DSC and time-resolved synchrotron X-ray diffraction (XRD) experiments were conducted on blends with a PE concentration from 0 to 100% at intervals of 10% for DSC and 20% for XRD. Based on XRD, two different ordered structures were identified in pure the PEs. The structure designated as PEx was truly crystalline and needed a very high degree of supercooling for its nucleation from the melt. The structure designated PEy formed without supercooling and showed long-range order with multiple reflections at small angles but only one broad reflection at high angle, typical of liquid crystalline samples. Furthermore, PEy had a high tolerance for molecules of different chemical nature. In the PE-PO blends no other ordered structures were formed other than the ones observed in the pure PEs and PO. The peaks in the DSC runs of the PE-PO blends were linked to transitions of the different polymorphic forms. All structural information of the binary blends as a function of concentration and temperature was collected in morphology maps. The binary blends exhibited eutectic characteristics visualized in the morphology maps with a eutectic point at 40% PEs.

282