Testing the model of oblique transpression with oblique extrusion in two natural cases: Steps and consequences

Kinematic models of various types of transpression have been used to explain fabric features and strain in many natural deformation studies. Here, a mathematical model that encompasses all monoclinic and triclinic transpressional deformations including triclinic deformation with inclined simple shear (ϕ) and/or inclined extrusion orientations (υ) can be tested using a step-by-step approach with available field evidence. Two cases are presented. The first case from the Wabigoon-Quetico boundary in the Archean Superior Province utilizes both fabric orientation and quantified strain data. The best fit of the field evidence to the model indicates that deformation likely took place along subvertical shear zones via transpression with subhorizontal simple shear (ϕ = 0-20°) and variable inclined extrusion direction (extrusion can be either east or west and υ typically indicates extrusion orientations between 0 and 50° from vertical). The second case of the South Iberian shear zone has fabric orientation data, but no quantifiable strain possibilities. The best fit of the field evidence to the model indicates that deformation likely took place along a moderately inclined shear zone via transpression with subhorizontal simple shear (ϕ = 0-20°) and variable inclined extrusion direction (υ values between 0° and 80° from the true dip of the shear zone). Using this protocol in other examples of natural deformation will allow further constraints to be applied to kinematic models.