کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
6614364 | 459623 | 2014 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Electrodeposition and Characterisation of Copolymers Based on Pyrrole and 3,4-Ethylenedioxythiophene in BMIM BF4 Using a Microcell Configuration
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
مهندسی شیمی (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Electrochemical copolymerization of pyrrole (Py) and 3,4-ethylenedioxythiophene (EDOT) was performed in an ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate, (BMIM BF4) employing a 'micro-cell' in order to use the materials efficiently. Characterization of the copolymers formed on an ITO substrate was performed for different Py: EDOT ratios (1:2, 1:1, 2:1) in both aqueous and ionic liquid electrolytes. The three copolymers displayed different absorbance spectra with λmax of the polaron species at 507, 540 and 580 nm for PPy-co-PEDOT ratios of 1:2, 1:1, 2:1, respectively. Electrochemical and spectroelectrochemical analysis revealed that the properties of the copolymer depend upon the Py/EDOT monomer ratio used. The copolymer PPy-co-PEDOT (2:1) displayed good stability, a switching time of 20 s and a colouration efficiency of 101.3 C-1cm2. The presence of Py in the copolymer stabilised the polaron state of the copolymer and allowed greater ion mobility compared to the PEDOT alone.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Electrochimica Acta - Volume 115, 1 January 2014, Pages 440-448
Journal: Electrochimica Acta - Volume 115, 1 January 2014, Pages 440-448
نویسندگان
Lavinia Astratine, Edmond Magner, John Cassidy, Anthony Betts,