کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7206082 | 1468659 | 2018 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Mechanical properties and damage constitutive model of coal in coal-rock combined body
ترجمه فارسی عنوان
خواص مکانیکی و مدل سازنده آسیب زغال سنگ در ترکیب بدن ذغال سنگ و سنگ
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
زغال سنگ-ترکیب نمونه، خاصیت مکانیکی، مدل سازنده خسارت، سیستم آبرسانی، نسبت زغال سنگ-سنگ،
ترجمه چکیده
توده های زغال سنگ و سنگ، در مهندسی زیرزمینی مانند معدن زغال سنگ و پشتیبانی جاده، بار می شوند و منجر به خواص مکانیکی مختلفی از توده زغال سنگ و سنگ های خالص می شود. دقیقا بدست آوردن خواص مکانیکی زغال سنگ در سنگ های ترکیبی زغال سنگ می تواند به درستی درک ویژگی های تغییر شکل و شکست در توده ذغال سنگ زیرزمینی کمک کند. ابتدا یک روش تجربی برای به دست آوردن فشار و فشار ذغال سنگ در نمونه های ترکیبی زغال سنگ و با استفاده از سنسورهای فشار پیشنهاد و اعتبار یافت. سپس، آزمایشات روی 13 نوع نمونه های ترکیبی سنگ و سنگ انجام شد. نتایج نشان می دهد که سنگ از یک بازیابی کششی برخوردار بوده و هنگامی که نمونه سنگ ذغال سنگ شکست خورده است، اثر بارگیری بر روی شکست زغال سنگ اثر می گذارد. استحکام فشاری زغال سنگ در نمونه با قدرت سنگ افزایش می یابد و با نسبت ارتفاع سنگ زغال سنگ کاهش می یابد. علاوه بر این، دو مدل سازنده آسیب زغال سنگ به صورت سریال اتصال یک جسد با یک یا دو بدن نیوتن ایجاد شد تا اثرات سنگ ها بر رفتار مکانیکی زغال سنگ در نمونه های ذغال سنگ را نشان دهد. در نهایت، نتایج آزمون با استفاده از دو مدل سازگار بود. نشان داده شده است که این دو مدل می توانند به طور دقیق منحنی تنش-تنش زغال سنگ در نمونه های ذغال سنگ را توصیف کرده و منعکس کننده تأثیر سنگ ها، ترکیب ترکیبی سنگ و زغال سنگ و نسبت ارتفاع سنگ می باشند. ثابت بودن اتصالات دو مدل دارای معانی فیزیکی واضح است و می تواند به راحتی به دست آید، که انتظار می رود به طور گسترده در مهندسی زیرزمینی مورد استفاده قرار گیرد.
موضوعات مرتبط
مهندسی و علوم پایه
علوم زمین و سیارات
مهندسی ژئوتکنیک و زمین شناسی مهندسی
چکیده انگلیسی
Coal and rock mass bear loads together in underground engineering such as coal mining and roadway support, resulting in different mechanical properties from those of pure coal and rock mass. Accurately obtaining the mechanical properties of coal in coal-rock combined body can help to properly understand the deformation and failure characteristics of the underground coal mass. First, an experimental method to obtain the stress and strain of coal in coal-rock combined samples using strain gauges was proposed and validated. Then, tests on thirteen types of coal-rock combined samples were conducted. The results show that the rock experienced a strain recovery and played a loading effect on the failure of coal when coal-rock samples failed. The compressive strength of coal in the sample increased with the rock strength, and decreased with the coal-rock height ratio. Furthermore, two damage constitutive models of coal were established by serially connecting one damage body with one or two Newton body(s), to reveal the influences of rock(s) on the mechanical behavior of coal in coal-rock samples. Finally, test results were fitted using the two models. It was showed that the two models can accurately describe the stress-strain curves of coal in coal-rock samples and reflect the influences of rock(s), coal-rock combination form and coal-rock height ratio. The fitting constants of the two models have clear physical meanings and can be easily obtained, which are expected to be widely used in underground engineering.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Rock Mechanics and Mining Sciences - Volume 110, October 2018, Pages 140-150
Journal: International Journal of Rock Mechanics and Mining Sciences - Volume 110, October 2018, Pages 140-150
نویسندگان
X.S. Liu, Y.L. Tan, J.G. Ning, Y.W. Lu, Q.H. Gu,