کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7206161 1468662 2018 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Stresses induced by a demolition agent in non-explosive rock fracturing
ترجمه فارسی عنوان
استرس های ناشی از تخریب عامل انفجار سنگ شکستگی
کلمات کلیدی
فشار، شکستن سنگ غیر منفجره، مهندسی راک، عامل تخریب، راه حل تحلیلی،
ترجمه چکیده
استرس هایی که توسط یک عامل تخریب در شکستن سنگ غیر منفجره ایجاد شده است، با استفاده از تئوری کشش و اصل سیلندر ضخیم دیواره مورد آزمایش قرار گرفت. ابتدا تحت فشار هواپیما قرار گرفت و تنشهای محوری و شعاعی در سنگ ایجاد شده بوسیله سوراخ تحت فشار تحت فشار قرار گرفتند. تأخیر عمود بر خط اتصال دو سوراخ مجاور بر مبنای تبدیل مختصات محاسبه شد. یک مطالعه پارامتری برای بررسی تأثیر فاصله و اندازه سوراخ در توزیع استرس انجام شد. مدل تحلیلی، یک روش برای تعیین فاصله و اندازه سوراخ مطلوب و همچنین زمان لازم برای شکستن سنگها با خواص مشابه کارهایی است که برای تعیین زمان فشار زمان عمل عامل تخریب استفاده می شود. استنتاج می شود که استرس کششی به طور چشمگیری با افزایش فاصله سوراخ کاهش می یابد، در حالیکه با افزایش اندازه سوراخ افزایش می یابد اما تاثیر فاصله بر تغییرات استرس بیشتر از اندازه سوراخ است. همچنین از مطالعه دریافت شده است که استرس های کششی در وسط دو سوراخ با یک توزیع لگاریتمی به طور چشمگیری کاهش یافته است در حالی که تنها افزایش فاصله سوراخ. همان طور که پیش بینی می شود، زمان شکستن سنگ و شکستن فاصله زمانی حفره برای سنگ های نرم و سخت افزایش می یابد.
موضوعات مرتبط
مهندسی و علوم پایه علوم زمین و سیارات مهندسی ژئوتکنیک و زمین شناسی مهندسی
چکیده انگلیسی
Stresses induced by a demolition agent in non-explosive rock fracturing was analysed using the theory of elasticity and the thick-walled cylinder principle. Circumferential and radial stresses in rock induced by an internally pressurized hole was first analysed under plane strain condition. Stresses perpendicular to the line connecting two adjacent holes were calculated based on coordinate transformation. A parametric study was carried out to investigate the influence of spacing and size of hole on the stress distribution. The analytical model provides a method to determine the optimum hole spacing and size as well as the time needed for fracturing rocks with properties similar to those employed to determine the pressure-time function of the demolition agent. It is found that tensile stress decreased dramatically with the increasing of hole spacing, while it increased with increment of hole size but the influence of spacing on stress changes was more significant than that of hole size. It is also concluded from the study that tensile stress in the middle of two holes decreased dramatically with a logarithmic distribution when solely increasing hole spacing. As can be anticipated more time is required for rock fracturing and breaking when hole spacing is increased for both soft and hard rocks.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Rock Mechanics and Mining Sciences - Volume 107, July 2018, Pages 172-180
نویسندگان
, , ,