کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7206777 1468706 2013 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Discrete element method simulations of analogue reservoir sandstones
ترجمه فارسی عنوان
شبیه سازی روش های عنصر گسسته از ماسه سنگ مخزن آنالوگ
کلمات کلیدی
ماسه سنگ مخزن، روش عنصر گسسته، مدل تماس باند موازی،
ترجمه چکیده
روش المان دیجیتالی برای مدل سازی رفتار دو ماسه سنگ طبیعی که معمولا به عنوان آنالوگ برای ماسه سنگ مخزن نفت استفاده می شود استفاده شده است. با تعداد نسبتا زیادی از پارامترهای مورد نیاز برای تعریف مدل و چند مقیاس کوچک مقیاس که بر مبنای آنها پایه گذاری می شوند، ابتدا مطالعه پارامتری برای شناسایی نحوه رفتار هر یک از پارامترهای ماکروسکوپی کلی انجام شد. این مطالعه اهمیت سهم بار در بین تماس ذرات و اوراق قرضه را برجسته کرده است. مدل ماسه سیمان قوی تر سیمان با توجه به پاسخ مشاهده شده در یک سطح استرس کالیبره شده است و پیش بینی های دیگر در سطوح استرس پس از آن یافت می شود که خوب است. دومین ماسه سنگی ضعیفتر سیمان نیز مدلسازی شد. مشخص شد که در حالی که این ماسه سنگ دارای وزن بسیار پایین سیمان بود، تنها تغییرات جزئی به شدت باند و نسبت مخاطبین باند نسبت به مواد قوی تر پیوند شده مورد نیاز بود. این ممکن است به دلیل ناکامی در مدل سازی پارچه طبیعی ماسه سنگ ها باشد. به طور کلی، رژیم پس از اوج به خوبی مدل نیافت، و همچنین پاسخ حجمی نبود، که در نتیجه ناکامی در رسیدن به تخلخل در محل در مدل بود.
موضوعات مرتبط
مهندسی و علوم پایه علوم زمین و سیارات مهندسی ژئوتکنیک و زمین شناسی مهندسی
چکیده انگلیسی
The Discrete Element Method was used to model the behaviour of two natural sandstones that are commonly used as analogues for oil reservoir sandstones. With a relatively large number of parameters needed to define the model and few micro-scale data on which to base them, a parametric study was first carried out to identify how each parameter affects the overall macroscopic behaviour. This study highlighted the importance of the load share between the particle contacts and the bonds. The model for the more strongly cemented sandstone was calibrated against the response observed at a single stress level and predictions at other stress levels were then found to be good. A second, more weakly cemented, sandstone was also modelled. It was found that while this sandstone had a very much lower cement content by weight, only minor modifications were needed to the bond strengths and the proportion of bonded contacts compared to the more strongly bonded material. This may be because of the failure to model the natural fabric of the sandstones. In general the post-peak regime was not modelled well, nor was the volumetric response, the latter as a result of the failure to achieve the in-situ porosities in the model.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Rock Mechanics and Mining Sciences - Volume 63, October 2013, Pages 93-103
نویسندگان
, , ,