کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7881698 | 1509602 | 2014 | 14 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Texture transition in cold-rolled nickel-40Â wt.% cobalt alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The micromechanical aspects of rolling texture development in Ni-40 wt.% Co alloy during very large reductions (up to εt = 3.9) have been studied. The alloy showed a typical Cu-type texture up to a true strain of εt = 3; however, the texture undergoes an abrupt transition to Bs-type on further rolling to εt â 4. (The Bs-type texture, here, comprises almost equal fractions of Goss and Bs components.) Microstructural observations, at early stages, show that deformation is accommodated entirely by slip, and very little presence of deformation twinning is observed to explain the texture transition. However, at much higher reduction levels, micrographs show a high fraction of Cu-type shear bands. These bands are predominantly found in Cu-oriented grains and the crystallites inside the shear bands are preferentially oriented towards Goss, which could explain the final texture evolution.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Acta Materialia - Volume 74, 1 August 2014, Pages 151-164
Journal: Acta Materialia - Volume 74, 1 August 2014, Pages 151-164
نویسندگان
R. Madhavan, R.K. Ray, S. Suwas,