Aerodynamics and flight mechanics activities for a suborbital flight test of a deployable heat shield capsule

MINI-IRENE is the Flight Demonstrator of IRENE, a new-concept capsule with a variable geometry, originally conceived by ASI to widen the range of available platforms to retrieve payloads and/or data from low Earth orbit. The main characteristics of IRENE is the “umbrella-like" deployable front structure that reduces the capsule ballistic coefficient, leading to acceptable heat fluxes, mechanical loads, stability and final descent velocity. Following the feasibility studies carried out since 2011, with also preliminary Thermal Protection System materials tests in plasma wind tunnels, the objective is now to design and build a Flight Demonstrator and a Ground Demonstrator to prove, with a suborbital flight and with a Plasma Wind Tunnel (PWT) test campaign, the functionality of the deployable heat shield. The Flight Demonstrator shall be included as a secondary payload in the interstage adapter of a VSB-30 launcher from ESRANGE, then ejected during the ascent phase of the payload section, perform a 15-min ballistic flight, re-enter the atmosphere and hit the ground. The Ground Demonstrator, representative of the Thermal Protection System of the Flight Demonstrator, shall be instead exposed to a heat flux similar to that expected for an atmospheric re-entry from low Earth orbit inside the SCIROCCO Plasma Wind Tunnel at CIRA. The paper, after a short description of the mission profile both for orbital and suborbital flights, focuses on the aerodynamics and flight mechanics activities held for the suborbital flight and PWT test campaigns.