کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
10620190 988603 2013 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Detailed modelling of delamination buckling of thin films under global tension
ترجمه فارسی عنوان
مدلسازی کاملی از خم شدن کفپوشهای نازک تحت تنش جهانی
کلمات کلیدی
ترجمه چکیده
نمونه های کششی از فیلم های فلزی بر روی بستر های سازگار به طور گسترده ای برای تعیین خواص اینترفیس استفاده می شود. این خواص به واسطه مقایسه انحنای خوشه ای آزمایش شده و یک مدل ریاضی که حاوی خواص رابط ها به عنوان پارامترها است شناسایی می شوند. مدل های دو بعدی جرمی برای خم شدن با خم شدن، قادر به ضبط وضعیت استرس پیچیده و تغییر شکل در ناحیه تست کشش یکسانی نیستند. بنابراین، مدل های سه بعدی در یک رویکرد چند بعدی توسعه می یابند. نشان داده شده است که برای آزمایش کشش یکسانی در نظر گرفته شده، فرایند خم شدن و خمیدگی مرتبط با آن، از طریق برش موازی به علاوه تنش فشاری در فیلم آغاز می شود. مدل پیشنهادی قادر است تمام پدیده هایی که از لحاظ آزمایشگاهی قابل مشاهده است، مانند تکان خوردگی فیلم، انحنای نوار فیلم و شکل گیری مثلث های مثلثی تولید شود. در ترکیب با داده های تجربی، مدل محاسباتی توسعه یافته در تعیین خواص قدرت رابط، مؤثر است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد سرامیک و کامپوزیت
چکیده انگلیسی
Tensile specimens of metal films on compliant substrates are widely used for determining interfacial properties. These properties are identified by the comparison of experimentally observed delamination buckling and a mathematical model which contains the interface properties as parameters. The current two-dimensional models for delamination buckling are not able to capture the complex stress and deformation states arising in the considered uniaxial tension test in a satisfying way. Therefore, three-dimensional models are developed in a multi-scale approach. It is shown that, for the considered uniaxial tension test, the buckling and associated delamination process are initiated and driven by interfacial shear in addition to compressive stresses in the film. The proposed model is able to reproduce all important experimentally observed phenomena, like cracking stress of the film, film strip curvature and formation of triangular buckles. Combined with experimental data, the developed computational model is found to be effective in determining interface strength properties.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Acta Materialia - Volume 61, Issue 7, April 2013, Pages 2425-2433
نویسندگان
, , , ,